I think better than the naze32 due to the pin layout - no need for a pwm break out cable - has all the pin soldering points available (solder as many on as you need)

36mm x 36mm board size but is a suitable flight controller for any quad hex or even octocopter

 

The flip32+ also has a barometer (MS5611) so you have the addition of altitude hold
Also a compass(HMC5883L) so you can add a gps or use IOC inteleigent orientation control

  •  STM32 - 32bits! 
  • MPU6050 
  • HMC5883L - (Mag)
  •  MS5611 - (Baro)
  • MMA8452  - 

RcInput order: Roll,Pitch,Throttle,Yaw,Aux1,Aux2,Aux3,Aux4

GV to RT = GND VIN RX TX
Gv to CD = GND VIN SCL SDA

Setting up is easy and fast 

Setup your radio to be 1000-2000 and midstick exactly 1500 (this all can be changed of course but this is easy to do)

 

connections are the same for acro and the 32+

PPM available on CH1

Connect GPS on the serial port if required

 

Cleanflight software click here

Baseflight software click here

Flip32 + (Naze32 compatable with mag and baro)

  • Product Code: Flip32+
  • Availability: In Stock
  • USD$42.80

  • Ex Tax: USD$38.91

Available Options



Related Products

Buzzer (for flight controller)

Buzzer (for flight controller)

Buzzer for the Naze / Lazybee / KK2 / Flip Great to get audible feedback from the flight controller..

USD$1.54 Ex Tax: USD$1.40

Out Of Stock

Flip32 Acro Rev 7 (Naze32 compatible)

Flip32 Acro Rev 7 (Naze32 compatible)

The Best Flip Ever ! (New Ver 2.6 Design)  Building on the naze 32 and making it even better b..

USD$20.90 Ex Tax: USD$19.00

Zippa 250 Atail Frame

Zippa 250 Atail Frame

Current kit includes Red front' aluminium standoffs for bettter line of sight orientation - (not rea..

USD$49.50 Ex Tax: USD$45.00