Can be used with the t-box kit - but note that the VCC and GND need to be swapped - wrong pin order
Use this if you like - i ordered the pin order Vcc - Gnd but these were shipped - so even if you order from a supplier that shows pictures in the correct order and you specify in the order that the pin layout it critical - they still may ship you the wrong version - then act ingnorant to the requests to change - that was my experience.
0.96" I2C IIC SPI Serial 128X64 White OLED LCD LED Display Module for Arduino
Super High Brightness (Adjustable)
Super High Contrast (Adjustable)
Drive Duty: 1/64 Duty
Panel Size: 26.70mm x 19.26mm x 1.85mm
Active Area: 21.74mm x 11.2mm
Pixel Size: 0.15mm x 0.15mm
This OLED Part No. is UG-2864HSWEG01, not UG-2864AMBAG01
Note: If you decide to buy OLED display, you must confirm that you can make it work by yourself, we'll haven't any technology support except all the datasheet. Thanks for your understanding and support.
Needn't backlight, the display unit can self-luminous
High resolution: 128 * 64
Viewing angle:> 160 °
Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Voltage: 3V ~ 5V DC
Working Temperature: -30 ℃ ~ 70 ℃
Module Size: 27.0MM * 27.0MM * 4.1MM
I2C/IIC Interface, need 2 IO only.
Driver IC: SSD1306
OLED Display 128x64
- Product Code: OLED 128*64
- Availability: Out Of Stock
- Ex Tax: USD$7.00